Parts Needed
SuperCombiner
Cable Finder Tool
Short COAX Cable
room name in your cable splitter box. If not, we provide a tool in the installation kit so you can find the right wire.
To find the right wire, we apply power to that coax wire so that an indicator light on the other end can identify when the correct wire is found.
At the closest coax wire jack to the desired Xtender location, and unplug any cable attached to it.
You are looking for the adapter that looks like this – it comes with the optional installation kit.
Now, plug the power adapter that came with your Xtender into the cable finder adapter, and plug the adapter into the wall outlet with a piece of coax – you should now have something that looks like this…
Warning – do not plug the coax adapter into a satellite TV outlet or you may damage your satellite TV system!!
Locate your cable box
This is usually found in the basement, garage or on the outside of your home and will most likely look like one of the photos below:
Note that you might have both a telephone and a
Installing the SuperCombiner | 11 |
