Epson Bocs installation manual Programming the Remotes

		pointed there until the TV goes where
		you want - some TVs take a while to
		respond. if the TV only sees one digit,
		wait until that clears before you try
		pushing the Xtender channel button
		again.
		One other thing to watch for, some TVs
		need a long time in between pressing
		buttons - if you press the Red button
		(and have the default configuration
		where red is on channel 14) and you see
		the 1 on the TV but the 4 never shows up,
		see the next FAQ item "When I push an
		Xtender channel button on the remote it
		only sends one digit".
	When I push an	Some TVs need a long time in between
	Xtender channel	pressing buttons - if you press the Red
	button on the remote	button (and have the default
	it only sends one	configuration where red is on channel
	digit	14) and you see the 1 on the TV but the 4
		never shows up (and you were a good
		user and kept the remote pointed right at
		the TV), it is likely that the remote is
		sending the channel commands too
		quickly. We have noticed some Insignia
		TVs and a few others have this problem.
		The tradeoff is that it will take longer to
		change between Xtender channels, but
		since the alternative is not ever getting
		there, we suggest the following:
		Quick - pre-explanation first...
		What actually happens when you push
		the Red button is the remote sends a "1"
		then pauses then sends a "4" ...
		Depending on the TV, a different "pause
		time" is required - for now you will have
		to play with it a little to get it just right (as
		we get more feedback from users we will
		publish a detailed pause-time list for
		various TV models - so if you don't mind
		let us know what works for you if you
		have to adjust this in your house)...
		To set the pause time,
		Hold down the MENU button and the "4"
		key: The power light should come on and
		stay on
		press one of the following and then
Programming the Remotes		33