Epson manual UB-E02 Technical Reference Guide

UB-E02 Technical Reference Guide

CAUTION:

When you cannot check the MAC address on the label on the UB-E02 that is installed on the printer, be sure to finish the TM Net WinConfig by clicking Close from the Device tab; then turn off the printer and remove the UB-E02 to check it.

4. Double-click the TCP/IP tab.

5.	You can acquire the IP address by Auto or Manual setting.
❏	Auto setting:	Acquire the IP address, subnet mask, and default gate way from
		DHCP server. A DHCP server is required.
	Note:
	Do not use the auto setting without a DHCP server. Refer to the manual of the server for setting.
❏	Manual setting:	Assign the IP address, the Subnet mask, and the Default gateway.
		Ask your administrator for the IP address and the Default gateway
		to be set.

CAUTION:

Be sure that the Set by PING box is turned on if a setting by ping or arp command is permitted.

Rev. A Utilities 3-9