Epson E02 manual Initializing, Version Upgrading, Supported protocol, Upgrade Methods

UB-E02 Technical Reference Guide

5.5.6 Initializing

To initialize the UB-E02 when the power is turned on or reset, the standby period is required for 10 seconds. During this period. All network functions do not work.

The waiting time is:
When the IP address setting is Manual (Fixed):	approximately 6 seconds
When the IP address setting is Auto:	approximately 13 seconds
	(It can be longer, depending on the reply
	time of the host.)

5.5.7 Version Upgrading

The module can upgrade its own firmware over the network.

5.5.7.1 Supported protocol

❏TFTP

5.5.7.2 Upgrade Methods

❏By TFTP command (for Windows XP/2000/NT4.0) For more information, ask your dealer.

Rev. A Specifications 5-9