Safety Precautions
This section presents important information to ensure safe and effective use of this product. Please read this section carefully and store it in an accessible location.
CAUTION:
❏Be careful to avoid dropping conductive objects such as paper clips on the circuit board, as they could short circuit connections and cause damage from excessive current.
❏This product should only be connected to the devices specified in this guide. Connecting other devices could cause damage, fire or explosion.
❏Never disassemble or modify this product. Tampering with this product may result in injury, fire, or electric shock.
❏Be sure to set the product on a firm, stable, horizontal surface. The product may break or cause injury if it falls.
❏Never connect a public telephone line to the modular connector on this product.
❏Do not use in locations subject to high temperature, humidity or dust levels. Excessive temperature, humidity or dust may cause equipment damage, fire, or shock.
❏Parts on the circuit board may become hot during operation. Therefore, wait approximately 10 minutes after turning the power off before touching them.
❏To prevent the possibility of electrical shock, do not perform installation or connect cables during a thunderstorm.
Label
A caution label like the one is attached near the display module connector of the TM printers.
The label has the following meaning:
“The display module connector and the drawer
Product Servicing
This product cannot be serviced at the component level. If damage occurs, the
vi | Rev. A |
