Parts, Names and Operations - 21
EMP-715/505E intro.fm
Inserting the Remote Control Batteries
The remote control batteries are inserted in accordance with the following procedure:
1Remove the Battery Cover.
Apply pressure to the clip holding the Battery Cover, and then lift it upwards.
2Insert the batteries.
Ensure that the batteries are aligned correctly with the “+” and “-“ labels on the remote
control.
3Replace the cover.
Apply pressure to the battery cover until it clicks firmly int o place.
Point
·Specified batteries: Phase-3 alkali dry-cell batteries (LR6) X 2
·The batteries should be replaced approximately once every three months when used for
thirty minutes per day.
Caution
Ensure that unused batteries of the same type are used.
715_505E.bk Page 21 Friday, May 25, 2001 10:24 AM