Adjusting the Projection Position - 43
EMP-715/505E projection.fm
■
■■
■Adjusting the Projection Position
The projector can be adjusted into the following vertical projection positions.

Feet adjustments

Adjusts the projection angle of the projector.
1Lift the Foot Adjust Lever with a finger and raise the front part of the projector.
The Front Foot will protrude.
2Remove your finger from the Foot Adjust Lever, and then let go of the projector.
3Rotate the lower part of the Front Foot to minutely adjust the height.
Point
·There are cases where the screen will be distorted into a trapezoid shape when foot
adjustments are performed. This trapezoid distortion can be adjusted with the use of the
keystone correction function. (see page 45)
·The Front Foot is restored by lifting the Foot Adjust Lever with a finger and lowering the
projector.
Foot Adjust Lever
Becomes lower
Becomes higher
715_505E.bk Page 43 Friday, May 25, 2001 10:24 AM