![](/images/new-backgrounds/1169657/169657189x1.webp)
■Connecting up computer with USB cables
By connecting the computer and projector together with an USB cable, it is possible to view the contents of the memory card inserted in the projector from the computer.
Point
The computers that can be connected to the projector with a USB connection and used are restricted to those that operate on the Windows 98, Me and 2000 platforms.
Install the USB driver into the computer to be used if the projector is to be connected to a computer with a USB connection and a memory card used. The following differences exist with the driver to be installed depending on the OS in use.
·Windows 98
Refer to #2 and subsequent procedures below to install the USB driver registered on the EasyMP Software contained on the
·Windows Me
Install either the USB driver provided as standard with the OS, or the USB driver regis- tered on the EasyMP Software contained on the
·Windows 2000
Install the USB driver provided as standard with the OS. The USB driver provided with the projector cannot be used.
Connections and installation of the USB driver
1 Connect the projector to the computer with a USB cable.
Mouse/Com
2 Installs the USB driver. Switch on the power supply to the projector, start up Windows on the computer, and set the EasyMP software
[Add New Hardware Wizard] will be displayed on the computer screen. The setup pro- gram will be started up automatically.
Point
[Add New Hardware Wizard] will be displayed during procedure #1 if the USB cable is con- nected with a