![](/images/new-backgrounds/1169657/16965781x1.webp)
4 Starting projection.
Switch on the power supply to the computer or video equipment. If the equipment con- nected is video equipment, then also press the [Playback] or [Play] buttons.
The [No Signal] display will be erased, and projection will commence.
Point
·If [No Signal] remains displayed, check the connections once again.
·Depending on the computer, there are cases when it is necessary to switch the image sig-
nal output destination with the key ( , etc.) or the settings after establishing the connec- tion.
NEC | Panasonic | Toshiba | IBM | SONY | FUJITSU | Macintosh |
|
|
|
|
|
|
|
Fn+F3 | Fn+F3 | Fn+F5 | Fn+F7 | Fn+F7 | Fn+F10 | Mirroring is set up with monitor |
|
|
|
|
|
| adjustments on the control panel after |
|
|
|
|
|
| starting up. |
|
|
|
|
|
|
|
The table shown above provides examples for certain products. Refer to the computer’s instruction manual for further details.
·Press the [Resize] button when signals that support DVD players or wide television screens (16:9 images) have been input. The parameters will change between 4:3 images and 16:9 images whenever the switch is pressed.
·There are cases where a projected image will remain projected if a still image is projected for a long period of time.