Inserting the memory card - 75
EMP-715/505E software.fm
● Removing the card
Point
·Do not remove the memory card when the access lamp is illuminated in orange, or when
scenarios are being played back.
·Replace the memory card with a dummy card to prevent dust and dirt from entering the
slot.
1Press the button on the left-hand side of the PCMCIA card slot.
The button will protrude.
2Press the button on the left-hand side of the PCMCIA card slot once more time.
The memory card will be pushed out. Remove the card at this point.
Remove the memory card from the card adapter if necessary.
3Press the button on the left-hand side of the PCMCIA card slot if it is protruding.
This will restore the button in its original place.
4Remove the memory card from the card adapter if necessary.
Refer to the card adapter's instruction manual for details on removing the memory card.
Access lamp
715_505E.bk Page 75 Friday, May 25, 2001 10:24 AM