Epson EMP-715/505 manual Ending, Press the Power button once more

■Ending

End projection in accordance with the following procedure.

1 Switch off the power supply to the connected equipment. 2 Press the [Power] button.

A message to confirm that the power needs to be switched off will be displayed.

	Power		Help
Power	Source	Keystone
	Enter	S	elect

Power

Freeze

Power A/V Mute

R/C ON

E-ZoomOFF

	3
2	4
1	5
	Enter

Esc

3 Press the [Power] button once more.

The lamp will be extinguished, the Operation Indicator will blink in orange, and the cool- down process will commence.

Power OFF?

Please press Power Key again to power off.

	Power	Help
		K
Power	Source	eystone
	Enter	Select

Power

Freeze

Power A/V Mute

R/C ON

E-ZoomOFF

	3
2	4
1	5
	Enter

Esc

The Operation Indicator will change from blinking to being illuminated in orange once the cool-down process has been completed. The cool-down period will take approximately ninety seconds (depending on the surrounding temperature).

Point

·Press a different button if the power is not to be switched off. The message will be erased after seven seconds if no buttons are pressed (the power will remain on).

·Button operations are not possible when the Operation Indicator is blinking in orange. In this event, please wait until full illumination has been attained.

40 - Ending