Epson EMP-715/505 manual P Function, Press the P in P button on the remote control

■P in P Function

It is possible to display a video image as a sub-screen within a computer image or component video image. It is also possible to output the sound.

1 Press the [P in P] button on the remote control.

An operation guide will be displayed in the top left-hand corner of the screen and the sub- screen will be displayed at the top right-hand side of the screen.

2 Press the [Enter] button on the remote control to move the position of the sub-screen.

3 Press the [E-Zoom] button to change the size of the sub-screen.

4 Press the [Enter] button to set the sub-screen display.

Point

·The sub-screen will be erased when the [PinP] button is pressed again.

·The computer image or video image (only component video image signals) will be dis- played in the main screen, and the video image (Video, S-Video) will be displayed in the sub-screen. The video image displayed in the sub-screen can be amended with the PinP setting. (see page 67)

·Adjust the position and size of the sub-screen prior to displaying it.

·The sub-screen can be switched between five different sizes.

·When the position of the sub-screen has been amended, it will be displayed in the previ- ously determined position the next time the Picture-in-Picture function is executed.

P in P Function - 59