Introduction

Ink Jet Printer Precautions

The EPI-4000 uses ink jet technology. Even if you are familiar with other types of printers, please read and observe the following precautions to ensure safe, efficient operation.

•

•

•

•

•

•

•

•

Never put your hand inside the printer while it is printing.

Cartridge ink contains propyl alcohol. If the ink comes in contact with your skin, wash immediately with soap and water. If ink gets in your eyes, flush them immediately with plenty of water.

If ink accidentally gets on any part of the printing mechanism, wipe it off with a clean, damp cloth.

Store ink cartridges in a cool, dry place out of direct sunlight. Do not store cartridges at excessively high or below freezing temperatures.

Keep ink cartridges out of the reach of children.

Do not use an ink cartridge after the labeled expiration date. Ink cartridges cannot be refilled; do not take them apart.

Never remove an ink cartridge while the printer is on line or while it is printing.

Always follow these steps to turn off the printer: Press ON LINE to set the printer off line. Wait three seconds; then turn the printer power switch off. You must wait three seconds after you press ON LINE to ensure that the print head is safely capped at the left side of the printer.

•

•

If you want to transport the printer, make sure the print head is safely capped, as described above. Remove the ink cartridge before you move the printer to a new location.

Never turn the printer on or off unless an ink cartridge is installed.

•Do not turn off the printer while it is printing. The print head may not cap properly, resulting in faster ink consumption.

6 Introduction