SelecType Menus and Options

When auto continue is on:

•If the auto continue menu is set to on, printing resumes one second after the PS error occurs. When printing resumes, you may lose data if the actual paper size is narrower than the SelecType paper size setting.

Buffer Overflow Error (b0 or bF)

When the printer’s memory cannot hold all the data for a page, or the downloaded font or macros take up too much memory, a buffer overflow error occurs. When this happens, the printer goes off line and the display reads b0 or bF.

When auto continue is off:

•If you want to continue printing, press ON LINE. Your printer prints the page of data in its memory but some data may be lost. If an HP LaserJet series II printer receives the complete data, it prints the amount of data in the memory and ejects the paper. However, the EN-4000 prints it, receives the next data in the correct position, and then resumes printing. For this reason, in many cases you can still print a full page image, even with limited memory.

When auto continue is on:

•Printing resumes automatically after a buffer overflow error.

Using the Printer 2-15