Connecting the Printer to Your Computer

4.Plug the other end of the cable into the computer. If there is a ground wire at the computer end of the cable, use a screwdriver to attach it to the ground connector of the computer.

Connecting the Serial Interface

If you use the EPI-4000’s serial interface, use a properly shielded cable and make sure it is the correct one for your computer. Before following the steps below to connect the serial interface, change the interface setting using the SelecType interface menu, as described in Chapter 2.

1.Make sure that both your computer and printer are turned off.

2.Plug the connector of the cable securely into the serial port of the printer.

1-46 Setting Up the Printer