Status and Error Messages

P S Paper size error

The SelecType paper size setting does not match the actual paper loaded in the printer. Press MANUAL FEED to eject any paper in the paper path. Load the correct size paper or stop the data from the computer and reset the printer to the correct SelecType paper size setting. You can also press ON LINE to resume printing on the currently loaded paper. If you do this, however, some data may be lost. See Chapter 2 to change the paper size setting.

Note: If the SelecType auto continue menu is set to on, the PS error may be cleared automatically even though the problem remains. In most instances, leave the auto continue menu set to on.

rE R e s e t

This status message appears briefly when you press RESET. The printer erases any settings you made with software commands and reverts to the most recent SelecType settings.

r F Factory reset

This status message appears briefly when you hold down the RESET button for five seconds or longer. The printer resets all SelecType settings to their factory defaults. See Chapter 2 for a list of SelecType menus and their default settings.

S P Self print

When you print the status sheet or the self test, this status message appears.

Troubleshooting 6-7