Paper Handling

ProblemSolution

The printer prints a page and then stops (continued).

The display reads PS (continued).

You t y to insert a single sheet manually, but the sheet does not go in properly.

If the SelecType auto continue menu is on, your printer starts printing on the current paper about 1 second after the PS error message appears. When this happens, the printer’s memory may lose some data if the paper size in the tray is smaller than the paper size set in SelecType.

The paper is old or creased. Discard the old paper and load new, clean paper. If your paper is creased, you may not be using the proper size paper. Use only paper sizes that are within the range specified in Chapter 7.

Paper guides on the paper tray cover are too loose. Adjust the guides so that the paper slides in and out freely.

6-34 Troubleshooting