Memory Module

By installing a Single In-line Memory Module (SIMM), you can increase printer memory up to 13 MB (printer default 2MB + optional 4, 8, 16 or 32 MB). You may want to add additional 2 memory if you are having difficulty printing complex graphics or

if you regularly use numerous downloaded fonts.

Note:

The maximum amount of memory is 13 MB. Even though a 16 or 32 MB SIMM is installed, only 13 MB is accessible.

You can purchase SIMMs from various vendors. Be sure that the SIMM you purchase meets the following requirements:

❏72-pin, EDO type

❏Capacity of 4, 8, 16 or 32 MB

❏Access speed of 60 ns or less

❏Dimensions within 108 mm (4.25 inches) × 26 mm (1.02 inches), with a thickness of 10 mm (0.4 inch)

Installing

1.Turn off the printer.

w Warning:

To avoid electrical shock, do not attempt to install a SIMM unless the printer is turned off.

2.Unplug the power cord from the electrical outlet.

3.Turn the printer so that its right side faces you.

4.Open the printer cover by pressing the latch on the left side of the printer.

Using Options 2-7