OptionsSee this section if you have problems with optional equipment.The paper does not feed properly with the cut-sheet feederThe paper does not feed.

The cut-sheet feeder may be incorrectly installed. Reinstall it as described in Chapter 4.

You may have loaded too many sheets in the cut-sheet feeder’s bin. Make sure the bin contains no more than 150 sheets.

Paper may be jammed near the print head. Look for a paper jam and remove it.

Make sure the edge guide positions on the paper guide of the cut sheet feeder are correct. Position the edge guides at the diamond-shaped guide marks.

There may be only one sheet left in the bin. Add more paper.Two or more sheets feed at one time.

You may have loaded too many sheets in the cut-sheet feeder’s bin. Make sure the bin contains no more than 150 sheets.

You may have forgotten to fan the stack of paper before loading it into the bin, Remove the paper, fan it, and re-load it.

6-10 Troubleshooting