Pull Tractor

The optional pull tractor (C80032*) provides optimum continuous paper handling. (The asterisk (*) is a substitute for the last digit of the product number, which varies by country.)

The pull tractor is especially useful with continuous multipart forms. For best results, use the optional pull tractor along with your standard tractor installed in the front push tractor position. See Chapter 2 for instructions.

Note:

You cannot remove the rear push tractor. When you load continuous paper from the front paper path with the pull tractor on top, you can install the optional pull tractor in the pull tractor position.

Loading paper with the push tractor and the optional

pull tractor

1.Make sure the printer is turned off and the standard tractor is installed in the push tractor position.

2.Remove the paper tension unit by lifting it up and off the printer.

3.Install the optional pull tractor in the pull tractor position as described in “Using the pull tractor position” in Chapter 2.

Note:

The optional pull tractor cannot be installed in the rear push tractor position.

4.Make sure that the paper release lever is in the push tractor position.5.Load the paper in the push tractor as described in Chapter 2.6.Press the LF/FF button to advance the paper to the next page.
4-8 Using Printer Options