5.Press the Pause button or send data to the printer to leave the micro adjust mode.

Note:

For both cut sheet and continuous paper, the printer remembers this new position even after it has been turned off and back on.

Tear-Off

After you have finished printing, you can use the tear-off feature to advance continuous paper on the push tractor to the tear-off edge of the printer. You can then easily tear off printed sheets. When you resume printing the printer automatically feeds paper back to the loading position so you can save paper that would normally be lost between documents.

You can use the tear-off feature in two ways: by setting the default setting to select auto tear-off mode, or by pressing the

Tear Off /Bin button on the control panel.

If the perforation between pages is not aligned with the tear-off edge, you can adjust the tear-off position using the micro adjust feature as described in the previous section.

Caution:

Never use the tear-off feature to reverse-feed labels; they may come off their backing and jam the printer.

Never reverse-feed continuous paper when using the pull tractor; the paper could come off the pull tractor and jam the printer.

Using the Printer 3-15