8.Slide the right sprocket to remove any slack in the paper; then lock it in place.

9.Attach the printer cover and paper guide.

Note:

Advance the paper behind the printer guide as shown below. Make sure the paper path guide rests against the paper guide.

10.Slide the left and right edge guides to the center of the paper guide.

11.Turn on the printer. When the printer receives data, it automatically loads the paper before printing.

Note:

Always close the printer cover before printing. The printer stops printing when the cover is open.

You can also advance the paper to the loading position by pressing the Load/Eject button.

Caution:

Do not use the knob on the right side of the printer except to clear paper jams when the printer is off. Otherwise, you may damage the printer or cause it to lose the top-of-form position.

2-18Paper Handling