5.Slide the left sprocket to the left margin of the paper using the scale at the rear of the tractor as a guide. (Printing starts at the “0” mark. See the Appendix for more information on the left margin position.) Then slide the right sprocket to match the width of your paper, but do not lock it.

6.Make sure your paper has a clean, straight edge. Open the sprocket covers and insert paper from either the top, rear, or bottom paper slot. Then fit the holes of the paper over the tractor pins.

7.Close the sprocket covers.

8.Slide the right sprocket to remove any slack in the paper; then lock it in place.

2-20 Paper Handling