This chapter describes how to use optional equipment with your printer, including cut-sheet feeders, a pull tractor, a roll paper holder, and interface cards.

Cut-Sheet Feeders

Two cut-sheet feeders are available for use with your printer.

Printer model

High capacity (Bin 1)

Second bin (Bin 2)

 

 

 

Fx-2170

C80673*

C80674*

 

 

 

The asterisk (*) is a substitute for the last digit, which varies by country, Contact your local EPSON dealer for the part number in your country.

By connecting both cut-sheet feeders, you can operate them as a double bin cut-sheet feeder. This allows you to load two different types of paper. See “Assembling the double bin cut-sheet feeder” later in this chapter.

Before you install your cut-sheet feeder, assemble it by following the instructions in the manual that comes with it.

Note:

The second bin cut-sheet feeder can only be used in combination with the high capacity cut-sheet feeder.

Installing the high capacity cut-sheet feeder

1.Make sure the printer is turned off.

2.Remove the paper guide and the printer cover.
4-2 Using Printer Options