Epson FX-2170 Using Epson Calibration, CALIBRAT, press Enter, A:\UTILITY if, 1-20Setting Up the Printer, 4Type CALIBRAT, and press Enter

Using Epson Calibration

To run the CALIBRAT.EXE utility program, follow these steps:

1.Insert the diskette containing the calibration utility into your computer’s diskette drive.

2.In DOS, access the drive where you have loaded the diskette.

3.Change the current directory to UTILITY (that is, type A:\UTILITY if the diskette is in drive A).

4Type CALIBRAT, and press Enter.

5.Follow the instructions on the screen to calibrate your printer.

Note:

You can also copy the program from the diskette to your hard disk Then change the current directory (or set the path to the directory), type CALIBRAT, and press Enter.

1-20 Setting Up the Printer