Epson FX-2170 DOS printer utilities, Enter, Enter, Enter, PRNSET, utility, A: SETUP, B: SETUP); then, Enter. C: EPUTIL, CALIBRAT, and press Enter

On pages 1-18 through l-20, replace the original information with the new information below.

DOS printer utilities

Your printer driver disk includes the EPSON Remote! and EPSON Calibration utilities. You can use EPSON Remote! to change the printer’s default settings from your computer instead of the control panel. EPSON Calibration is used to properly align your printout.

Installing EPSON printer utilities

To install the utilities, follow these steps:

1.Insert the floppy disk containing the printer utilities into your computer’s disk drive.

2.From the DOS prompt, type A: SETUP (or B: SETUP); then press Enter.

3.In the screen that appears, select your printer’s name in the Printer Model window and press Enter. C: EPUTIL appears as the default directory.

4.Press Enter. All the necessary files are copied to the EPUTIL directory on drive C.

Using EPSON printer utilities

To use your EPSON utilities, follow these steps:

1.From the DOS prompt, change the current directory to the C drive.

2.To use the EPSON Remote! utility, type PRNSET, and press Enter, or to use the EPSON Calibration utility, type

CALIBRAT, and press Enter.

3.Follow the instructions on the screen to use either utility.

6