Epson FX-2170 Pin, out, 15 ,34, Chassis, Signal name, A-16Specifications, Command Summary, and Character Tables

Pin		Signal name	GND	In/Out	Description
n o .
14		Host Busy	30	In	Set LOW to indicate that host
					can receive peripheral
					device to host data. Then set
					high to acknowledge receipt
					of that nibble. Set high in
					response to PtrClk
					(nAck) low pulse to m-enter
					reverse data transfer phase.
				In	Set LOW to initialize the winter.
31		INIT	30
32			29	out	This signal is LOW when the
		DataAvail/
		DataBit-0,4			printer is in an error state.
36		1284-Active	30	In	Set HIGH during 1284 mode.
18		Logic H		out	This line is pulled up to +5V
					through 3.9 k		resistance.
3 5		+5V	-	O u t	This line is pulled up to +5V
					through 3.3 k		resistance.
17	Chassis		-	-	Chassis	GND.
16, 33,		GND	-	-	Signal	GND.
19-30
15 ,34		NC	-	-	Not connected.

•In/Out shows the direction of signal flow as viewed from the printer.

A-16 Specifications, Command Summary, and Character Tables