ESC G |
|
| Start scanning |
|
Format: |
|
| B1 B2 B3 B4 B5 | |
Command:ASCII: | ESC | G |
|
|
| Decimal: | 27 | 71 |
|
| Hexadecimal: | 1B | 47 |
|
Parameter: | (none) |
|
|
|
Handshaking: |
|
|
|
|
The handshaking procedures are different for the monochrome mode, color page sequence mode, color line sequence, and color byte sequence mode. See Chapter 2 for more details on handshaking.
Monochrome mode (one time scanning)
Monochrome image data is sent as a page. When a dropout color is specified, the color flag of the status byte indicates the specified dropout color.
1ESC G command
2Data block (image data for one block)
3ACK code
4Last data block (last line)
❏Steps 2 and 3 should be repeated for the number of lines (minus 1) specified for the image, until the last data block is received.
❏Do not send an ACK code after the last data block.
Color page sequence mode (three pass scanning)
Command Reference