ID Switch Setting
The SCSI ID is set with the ID switch mounted on the back of the scanner.
The ID switch numbers correspond to the available ID and can be set from 0 to 7. The numbers 8 and 9 should not be used.
Command Chart
This device uses the following group 0 processor commands.
Code | Command | Description |
|
|
|
00H | TEST UNIT READY | Ready for operation confirmation |
|
|
|
03H | REQUEST SENSE | Sense data request (*1) |
|
|
|
08H | RECEIVE | Data transfer from target |
|
|
|
0AH | SEND | Data transfer from initiator |
|
|
|
12H | INQUIRY | SCSI device data request (*2) |
|
|
|
*1 For sense data returned by the REQUEST SENSE command, only the extension sense data format is supported.
*2 The INQUIRY data returned by the INQUIRY command is as follows:
Interface Specifications |