Image trimming (1)
This section explains how to trim a rough image, and how to use the ESC R, ESC H, and ESC A commands to rescan at the same resolution and zoom values. This is useful when you want to check the image from within your software and then reset the scanning area for the next scan.
Rough scanned image
RX1 : Main scan resolution (dpi)
RY1 : Sub scan resolution (dpi)
HX1 : Main scan zoom (%)
HY1 : Sub scan zoom (%)
Image after trimming
RX2 : Main scan resolution (dpi)
RX2 : Sub scan resolution (dpi)
HX2 : Sub scan zoom (%)
HY2 : Sub scan zoom (%)
n1 | : main scan skip length | N1 | : main scan skip length |
n2 | : sub scan skip length | N2 | : sub scan skip length |
n3 | : main scan reading length | N3 | : main scan reading length |
n4 | : sub scan reading length N4 : sub scan reading length | ||