DIP Switch Setting
The DIP switch settings are different for the GT-6500 and ES-600C. Both versions are listed below.
GT-6500
The GT-6500 has two banks of DIP switches on the front of the scanner. The tables below show the function of each switch and the preset factory settings. The shaded boxes show the factory settings.
DIP switch 1 settings
Switch No. | Function | ON | OFF |
| | | |
SW 1-1 | Baud rate | See table | |
| | | |
SW 1-2 | | | |
| | | |
SW 1-3 | | | |
| | | |
SW 1-4 | Stop bit | 2 bits | 1 bit |
| | | |
SW 1-5 | Parity bit | Even | Odd |
| | | |
SW 1-6 | Parity check | Enabled | Disabled |
| | | |
SW 1-7 | Printer type for | See table | |
| direct printing | | |
SW 1-8 | | |
| | |
| | | |
B-34Scanner Model Technical Data
