CUTTING THE VENT TUBES
NOTE: Flue outlet tube and air inlet tube should be measured and cut to the proper length from the back of the unit to the outside wall of the house. See page 22, boxes 3 and 4.
IMPORTANT: The appliance’s venting system should be inspected at least once a year and immediately cleaned if necessary.
1
FLUE OUTLET TUBE
AIR INLET TUBE
MOUNTING PLATE
CAP
LONG SCREWS (4X)
SCREWS (3X)
2
4 1/2” to 12”
THICK WALL
This unit is to be installed on wall from 4 1/2" to 12" (114.3 mm to 304.8 mm) thick.
Page 21 |
