INTERIOR PREPARATION AND INSTALLATION OF THE BACK OF THE UNIT
4
Housewarmer recommends the use of the wall template to properly cut the wall holes and place the heater. If the template is damaged or not included, refer to the table and graphic below for proper alignment of the wall holes and heater.. Be sure the baseboard does not get in the way.
MEASUREMENTS
Model | HWDV080(B)DV | HWDV181(B)DV |
C | 7 3/8" | 11 3/8" |
D | 10 7/8" | 10 7/8" |
E | 21" | 24 1/2" |
F | 9 1/4" | 9 1/4" |
G | 4" | 4" |
I | 6 1/4" | 6 1/4" |
5
MARKING FOR
WALL HOLE
MARKING FOR WALL MOUNTING PLATE HOLES
Remove the template from the wall after the holes are marked. The hole location markings will be present on the wall.
FLOOR LINE
MARKING FOR
GAS INLET HOLE
Page 18 |
