INSTALLATION AND ASSEMBLY
2
SEALANT
MOUNTING
PLATE
CAP
FLUE OUTLET
TUBE
AIR INLET
TUBE
Failure to position these parts in accordance with diagram or failure to use only parts specifically approved with these appliances may result in property damage or personal injury.
INSTALLATION OF HOUSEWARMER PRODUCT
INSTALLATION AND ANY REPAIRS TO THIS APPLIANCE MUST BE DONE BY A QUALIFIED SERVICE PERSON.
WARNING: Read the installation instructions thoroughly before cutting or drilling any holes for installation.
WARNING: Do not remove any rating plates attached to the unit.
A qualified service person should be called to inspect this appliance annually.
Have all of your appliances checked annually.
3
CLEARANCES TO COMBUSTIBLES
Allow clearances (for all models) to adjacent combustible con- struction.
IMPORTANT: A qualified service person must install this ap- pliance. Installation must conform to local codes, or in the ab- sence of local codes, with the latest edition of the National Fuel Gas Code, ANSI Z223.1.
Page 16 |
