Loading Continuous Paper with the

Front Push Tractor

1.Make sure the printer is

turned off. Then open the front cover and make sure the tractor is installed in the front push position. (You may need to move it from the rear push or pull position.)

2.If you have the LQ-2090,

remove the sub cover from the front cover. (If it is difficult to remove, you can temporarily remove the front cover and then separate the sub cover from it.)

Be sure to reattach the sub cover when you want to print from a different paper source.

3. Set the paper release lever to the front push tractor position. Also set the paper-thickness lever to the proper position for your paper’s thickness. See “Adjusting the Paper-Thickness Setting” on page 18 for instructions.

4.Release the left and

right sprockets by pushing the blue lock levers backward.

Paper Handling

19