1.Make sure the paper guide is in the upright position. Then set the paper-thickness lever to 0 if you are using ordinary single-sheet paper. (If you are using envelopes, see “Envelopes” on page 30.)

2.Move the paper release lever to the single-sheet position.

3. Turn on the printer, if necessary.

4.Slide the left edge guide until it locks in place next

to the triangle mark on the paper guide. Next adjust the right edge guide to match the width of your paper.

5.Load a sheet of paper with the printable side down and

slide it down between the edge guides until it meets resistance. The printer feeds the paper automatically and is ready to print.

If the first printed line on your page appears too high or low, you can use the Micro Adjust function to adjust the top-of-form position. See page 33 for more information.

Paper Handling

27