3.Use your hand to slide the
print head to the middle of the printer.
4.Remove the new ribbon
cartridge from the package. | Ribbon guide |
The black plastic ribbon guide |
|
is held in place on top of the |
|
cartridge with a small tab. To |
|
release it, hold the sides of the |
|
ribbon guide and gently |
|
disconnect it. (Do not remove |
|
the ribbon guide from the |
|
ribbon, however.) |
|
5.Hold the ribbon cartridge by its handle and insert it into the printer at an angle, as shown below; then press down on both sides of the cartridge to fit the plastic hooks into the printer slots. You should hear it click into place.
Setting Up the Printer | 9 |