10. Attach the front cover with the continuous paper positioned as shown.

11. Make sure the paper guide is lying flat on the printer and slide the edge guides to the middle of the paper guide.

12.Turn on the printer. When the printer receives data, it automatically loads the paper and starts printing.

If the first line on your page appears too high or low, you can change its position using the Micro Adjust function as described on page 33. Additionally, when using the push tractor, it is a good idea to set the Auto tear-off function in the Default Setting mode to On. See page 38 for more information.

cCaution:

Never use the knob to adjust the top-of-form position; this may damage the printer or cause it to lose the top-of-form position.

Loading Continuous Paper with the

Rear Push Tractor

1.Make sure the printer is turned off, the tractor is installed in the rear push position, and the paper guide is removed. (You may need to move the tractor from the front push or pull position.)

2.Set the paper release lever to the rear push tractor position.

3.Release the left and right

sprockets by pulling the blue sprocket lock levers forward.

Paper Handling

21