1.You may need to press

the Tear Off/Bin button to advance the paper to the tear-off position. Make sure the Tear Off/Bin lights are flashing (the paper is at the current tear-off position).

2. Hold down the Pause button for about three seconds. The Pause light begins flashing and the printer enters Micro Adjust mode.

3.Open the paper guide cover, then press the LF/FF D button to feed paper backward, or press the Load/Eject U button to feed paper forward, until the paper perforation is aligned with the tear-off edge of the printer cover.

Tear-off edge of the printer cover

Paper perforation

Note:

The printer has a minimum and a maximum tear-off position. If you try to adjust the tear-off position beyond these limits, the printer beeps and stops moving the paper.

4.Tear off the printed pages.

5.Press the Pause button to turn off Micro Adjust mode.

When you resume printing, the printer automatically feeds the paper back to the top-of-form position and begins printing.

32Paper Handling