4 | Tear Off/Bin | Feeds continuous paper forward to the |
| (Set) button | Feeds continuous paper backward from the |
|
| |
|
| |
|
| Selects a |
|
| In default setting mode, selects a value. |
| Tear Off/Bin | Both flash when continuous paper is in the |
| lights | position. |
|
| Both off when continuous paper is not in the |
|
| position or when bin 1 of the optional |
|
| is selected. |
|
| Left light is on when Card mode is selected. |
|
| Right light is on when bin 2 of the optional |
|
| feeder is selected. |
|
|
|
5 | Menu buttons | When you press the Pitch (ItemU) and Tear Off/Bin (Set) |
|
| buttons at the same time, the printer enters or exits |
|
| default setting mode. See “Changing the Printer’s |
|
| |
| Menu lights | When the printer is in default setting mode, both menu |
|
| lights are on. |
|
|
|
6 | Load/Eject | Loads a single sheet of paper. |
| button | Ejects a single sheet of paper. |
|
| |
|
| Loads continuous paper from the standby position. |
|
| Feeds continuous paper backward to the standby |
|
| position if a sheet is loaded. |
|
|
|
7 | Micro Adjust | When you hold down the Pause button for three |
|
| seconds, the printer enters Micro Adjust mode. In this |
|
| mode, you can press the LF/FF D and Load/Eject U |
|
| buttons to adjust the |
|
| |
|
|
|
8 | LF/FF button | Feeds paper line by line when pressed quickly. |
|
| Ejects a single sheet or advances continuous paper to |
|
| the next |
|
|
|
9 | Pause button | Stops printing temporarily, and resumes printing when |
|
| pressed again. |
|
| When held down for three seconds, enters Micro Adjust |
|
| mode. When pressed again, exits Micro Adjust mode. |
|
|
|
10 | Pause light | On when the printer is paused. |
|
| Flashes when the printer is in Micro Adjust mode. |
|
|
|
11 | Paper Out light | On when no paper is loaded in the selected paper |
|
| source or paper is not loaded correctly. |
|
| Flashes when paper has not been fully ejected or paper |
|
| is jammed. |
|
|
|