6.Insert the paper into the front or bottom paper slot as shown below until it emerges between the platen and the ribbon guide. Then pull up the paper until the perforation between the first and second pages is even with the top of the printer’s ribbon.

Front slot

Before you load paper in the front slot, remove the front cover. Then load paper with the printable side facing up.

Bottom slot

Load paper in the bottom slot with the printable side facing up.

7. Fit four holes of the paper over the tractor pins on both sprockets. Then close the sprocket covers.

8.Slide the right sprocket to remove any slack in the paper, then lock it in place.

9.Slide the edge guides to the center.

24Paper Handling