3.Make sure the memory card light (next to the card slots) is off and all the slots are empty. Then insert your card as shown:

CompactFlash or

MemoryStick, SD, or

SmartMedia or xD

Microdrive (bottom)

MMC (middle)

(top)

The memory card light flashes, then turns green.

Memory card light

Note:

If the card is not properly formatted, you see a message on the RX620 screen. Press the button indicated on the RX620 screen to format the card. Any data stored on the card will be erased.

Scanning a Photo

After inserting a memory card, follow these steps to scan a photo to the card and save it in JPEG format:

1.Open the scanner lid.

2.Place your photo face-down on the glass in the upper-left corner, as shown.

Tip:

Slide your photo about 1/8 inch away from the edges of the glass to ensure that the edges of your photo are copied.

3. Close the scanner lid.

40Scanning to a Memory Card