■Don’t use a cartridge beyond the date printed on the cartridge package. For best results, use up the ink cartridges within six months of installing them.
■Store ink cartridges in a cool, dark place. Store each ink cartridge so that the bottom of its package faces down.
■After bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature for at least three hours before using it.
■Do not remove or tear the label on an ink cartridge; this can cause leakage.
■Don’t dismantle cartridges or refill them; you could damage the print head.
■Do not touch the green IC chip on the side of the cartridge. This may affect normal operation and printing.
■If you remove an ink cartridge for later use, protect the ink supply area from dirt and store it in the same environment as the Stylus Photo RX620. There is a valve in the ink supply port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining items that the cartridge touches. Do not touch the ink cartridge ink supply port or surrounding area.
LCD Panel Safety Instructions
■Use only a dry soft cloth to clean the LCD display. Don’t use liquid or chemical cleaners.
■If the LCD display is damaged, contact your dealer.
■If LCD solution gets on your skin, wash it off thoroughly with soap and water. If it gets in your eyes, flush them immediately with water.
FCC Compliance Statement
For United States UsersThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this
FCC Compliance Statement 77