Maintaining Your RX620

If you notice a decline in print quality, follow the instructions in this chapter to check and clean the print head. You’ll also find instructions on checking ink levels, replacing ink cartridges, and aligning the print head.

See these sections:

■“Replacing Ink Cartridges” below

■“Checking and Cleaning and Print Head” on page 58

■“Aligning the Print Head” on page 59

Replacing Ink Cartridges

When you print with low or empty ink cartridges, you see a message on the RX620 screen. Check this icon in the upper-right corner of the screen to see which cartridge is low or empty.

Ink levels

When a cartridge is more than six months old, print quality may decline. If necessary, try cleaning the print head as described on page 58. If printouts still don’t look their best, you may need to replace the cartridge.

Checking the Ink Supply

To check your ink supply, do the following:

1.Press the Setup button to enter setup mode.

2.Use the u and d buttons to select Ink Levels.

3.Press the OK button.

You see a graphic showing the amount of ink available in each cartridge: B (Black) C (Cyan), LC (Light Cyan), M (Magenta), LM (Light Magenta), and Y (Yellow).

4.When you’re done checking the ink levels, press the OK button.

53