4.Press the Scan button to set the RX620 to Scan mode.

5.Use the u and d buttons to choose Scan to Memory Card, then press the OK button.

6.Use the u, d, l, and r buttons to select the following options:

■Scan area: select Auto cropping (if the edges of the photo are light in color, select Max area)

■Document type: select Graphics

■Quality: select Photo

7.Press the x Color button. The photo is scanned and saved to the “epscan” folder on your memory card.

8.When scanning is finished, you see a confirmation screen. Note the name given to your image and its location on the card.

9.Click OK when done, then remove the card.

Caution:

Do not remove the card or turn off the Stylus Photo RX620 while the memory card light is flashing, or you may lose data.

Scanning Film or Slides

After inserting a memory card (see page 39), you can scan film or slides to the card and save your photos in JPEG format. Follow the steps in these sections:

■“Removing the Film Holder and Document Mat” on page 42

■“Placing 35-mm Slides in the Holder” on page 43

■“Placing 35-mm Film Strips in the Holder” on page 44

■“Scanning and Saving to Your Memory Card” on page 45

Scanning Film or Slides 41