Removing a Memory Card

Once you’re finished copying photos from your memory card, follow the steps below to prepare your computer before removing it. Be sure to remove any cards before unplugging the USB cable from your RX620.

Caution:

Do not eject a card while the memory card light is flashing, or without performing the steps described below, or you may lose data on the card. Be sure all cards have been removed before unplugging the USB cable.

1.On a Macintosh, drag the memory card icon from your desktop to the trash.

If you’re using Windows XP or 2000, click the Unplug or Eject Hardware icon on the taskbar. In Windows XP, click Safely Remove USB Mass Storage Device. In Windows 2000, click Stop USB Mass Storage Device.

Note:

In Windows 98 or Me, you don’t need to do anything on your computer before removing a card.

2. Remove the card by pulling it straight out of the slot.

52Saving and Storing Photos