
Connecting to a Computer
14
Connecting to a Computer
When connecting, be sure to:
c• Turn off the power for both the projector and the computer.
Damage may result if you try to make a connection when the power is switched on.
•Check the connector types.
Damage may result if you attempt to insert a connector into the incorrect port.
Compatible computers
Condition 1: Check that the computer has an image output port, such as an RGB port, monitor port or CRT port.
Some computers with a
Condition 2: The display frequency and resolution of the computer must correspond to that of the projector. See “Supported Display Resolutions” on page 64.
p You may need to purchase a separate adapter depending on the shape of the computer’s port. Refer to the documentation provided with the computer for further details.
Notebook connection
Setup
Press and hold the [Fn] key, followed by the appropriate function number key that lets you display on an external monitor. Refer to your computer’s documentation for further details.
◗It may take a few moments until the computer image is projected.
◗In Windows, a dialog box may appear to alert you that new display hardware has been found. Follow the
◗Depending on the PC, the monitor may go blank when using the external video output on the computer.
Projecting images from a computer
Different cables are used depending on whether the monitor port of your computer is a Mini
When using a Mini D-Sub 15 pin connector
To monitor port
Computer cable
(accessory)To Computer / Component Video port
p When using a notebook or a PC with a