When You Suspect a Problem

45

When the indicators provide no help

Image is distorted / Image contains interference page 48

 

No images appear (Nothing is displayed) page 45

Only part of the image is displayed (large/small) page 49

 

Image colors are poor, tinted green or tinted red/purple page 50

No images appear (Messages are displayed 1) page 46

Image is dark page 51

 

No images appear (Messages are displayed 2) page 46

 

No sound can be heard page 51

 

Image is out of focus (unclear) page 47

 

The remote control does not work page 52

 

Vertical stripes appear in the image page 48

 

The power does not turn off (after the [Power] button is pressed) page 52

 

 

 

 

 

 

No images appear (Nothing is displayed)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Was the power turned off and then straight back

After the power has been switched off and the projector is in cool-down mode, the

 

 

 

 

 

 

 

 

 

 

on again?

[Power] button will not work.

 

 

 

 

 

 

 

 

 

 

 

 

 

• Has a Sleep Mode interval (5, 10 or 30 minutes)

When a Sleep Mode interval has been set, the lamp cuts out after no operations

 

 

 

 

 

been set?

have been carried out for the set time (5, 10 or 30 minutes).

 

 

 

 

 

 

 

The power indicator lights orange at this time. ([Menu] button

“Setting”

 

 

 

 

 

 

“Sleep Mode”) SeeSetting menu” on page 39.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Has the image brightness been adjusted

See “Image menu” on page 36.

 

 

 

 

 

 

correctly? ([Menu] button “Image”“Picture

 

 

 

 

 

 

 

 

Quality” “Brightness”)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Is the projected image completely black?

Some images being displayed, including some screen savers, may be completely

 

 

 

 

 

 

black.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Is A/V Mute activated?

See “A/V Mute” on page 30.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Have you pressed the [Power] button?

See “Turning on the Projector” on page 22.

 

 

 

 

 

 

• Try resetting all of the current settings.

See “Reset menu” on page 42.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Is an image signal being input?

Check if a picture signal is being input.

 

 

 

 

 

 

 

Set the “Message” option to “ON” in the “Setting”“Display”

“Message”

 

 

 

 

 

 

configuration menu, in order to view the picture signal information. See “Setting

 

 

 

 

 

 

menu” on page 39.