Adjusting the Display

Adjusting the Display

Adjusting the projection size

The size of the projected image is basically determined by the distance from the projector to the screen. See “Projection distance and screen size” on page 12.

1Press the [Wide] or [Tele] buttons on the control panel to adjust the projection size.

[Wide]: increase the size

[Tele]: reduces the size

The image can be enlarged in this way to 1.2 times the normal size.

If you would like to enlarge the image further, move the projector further away from the screen.

• The default setting is wide.

p • The E-Zoom function lets you enlarge parts of the image. See “E-Zoom” on page 31.

25

Setting the focus

Turn the focus ring to adjust the image focus.

• If the surface of the lens is dirty, or misted over as a result of

p condensation, it may not be possible to adjust the focus correctly. If this happens, clean or de-mist the lens. See “Cleaning the lens” on page 54.

If the projector is positioned outside the normal projecting range of 2.9-36.4 feet (87-1109 cm), it may not be possible to obtain the correct focus. If you have trouble obtaining the correct focus, check the projection distance.