Functions for Enhancing Projection

29

Advanced Operation

Functions for Enhancing Projection

Adjusting computer generated images

The computer signal is analyzed and the following settings are adjusted to ensure the optimum image quality.

Trackingg

Position

Adjust the Tracking and Sync settings manually if Auto setup cannot be performed. ([Menu] button “Image”“Picture Quality”“Tracking,” “Sync.”) SeeImage menu” on page 36.

Selecting a color mode

There are five present color modes available for use. Make a selection appropriate to the conditions in which you are projecting.

Sync.g

p You can set Auto setup to off in the “Image” “Auto Setup” configuration menu. (The default is ON) See “Image menu” on page 36.

When Auto setup is set to off, press the [Auto] button on the remote control to perform auto setup.

Dynamic

Images are modulated and made crisper to emphasize brightness.

Presentation

Brightness is emphasized. For presentations in bright rooms.

Theatre

Best for watching movies in their natural tones.

Living Room

Brightness is emphasized. Ideal for playing video games in bright rooms.

sRGBg

p If you press the [Auto] button during E-Zoom or Freeze operation, or when a configuration menu is being displayed, the display will be halted and auto setup will take place.

Conforms to the sRGB color standard. If the connected source has an sRGB mode, set both the projector and the connected source to sRGB.